Product Description

The VooPoo Drag Nano 2 Pod Kit is a small, easy-to-use MTL pod kit from VooPoo. The Nano 2 is a mess-free, low-maintenance kit with a lot to offer new vapers, thanks to its flexible settings, integrated coils, and leak-proof pods. It is available in eight stylish finishes and comes with a chain lanyard for easy portability.

The Nano 2 kit includes an internal battery with an 800mAh capacity that can be recharged in under an hour using the USB Type-C port. Most vapers should be able to go a full day without needing to recharge the battery. Temperature control, over-charge protection, and a ten-second automatic cut-off are among the kit’s safety features.

The kit has three power settings, which are indicated by the color of the lights on the device’s side: white indicates high power, green indicates medium power, and blue indicates low power. The device’s power output ranges from 8 to 20 watts.

There are no messy coil changes with the Drag Nano 2 kit because it uses see-through pods with integrated coils. Simply discard the entire pod and replace it with a new one when your E-Liquid begins to taste burnt. The kit works with both VooPoo Drag Nano 2 Replacement Pods and VooPoo Vinci Replacement Pods, giving you a backup option if one of the pods is out of stock. The pods are magnetically held in place and can be filled from the top by removing the clamshell mouthpiece—no need to remove the pod to refill.

Two coil resistances are available in the pods that come with the kit: 0.8Ω (ohm) and 1.2Ω (ohm). For MTL vaping, both pod types work best with high-PG E-Liquids like Nicotine Salts and 50/50 E-Liquids. These incredible features make it undoubtedly one of the best pod Kit.

Product Features and Specifications

  • 72mm x 44mm x 14.2mm (with pod)
  • Zinc Alloy Construction
  • Beginner-friendly
  • Utilises pods with built-in coils
  • Automatic draw activation
  • Easy top-fill mechanism
  • Draw Activated
  • Adjustable airflow
  • 2ml E-Liquid capacity
  • 10-second auto cut-off
  • Three power modes
  • 8-20W Output Power
  • 3.2-4.2V Output Voltage
  • 800mAh internal battery
  • No leaking or other performance issues
  • Can be filled without removing the pod
  • E-juice level can be checked without removing the pod

Product Contents

  • 1 x VooPoo Drag Nano 2 Device
  • 1 x VooPoo Drag 2 Replacement Pod – 0.8Ω
  • 1 x VooPoo Drag 2 Replacement Pod – 1.2Ω
  • 1 x Chain Lanyard
  • 1 x USB Type-C Cable
  • 1 x User Manual

How to use Drag Nano 2 Pod Kit by VooPoo

The way to do everything is to use the round button on the side. The DN2 can be turned on or off by pressing the button five times. After turning on the device, press the button three times to enter the output wattage change mode, then click to cycle through the three output levels. Each level is represented by a different colored LED. The levels are as follows:

  • White: High power
  • Green: Mid Power
  • Blue: Low Power

Voopoo does not specify the exact wattage output of each level for each pod, but the Drag Nano 2 can produce 8-20W and 3.2-4.2V. Using Ohm’s law, we can estimate that the 0.8 pod produces something around 13W, 17W, or 20W of power. The 1.2 pod produces something around 8W, 12W, and 15W of power.

When you take a charge from the device, the LEDs light up in the color that corresponds to your output level, and the number of LEDs that light up indicates your battery level:

  • 3 LEDs: 66-100%
  • 2 LEDs: 33-66%
  • 1 LED: Less than 33%

You can illuminate the LEDs and see your output level and battery life by pressing the button once at any time.

Price and Availability.

The incredible VooPoo Drag Nano 2, even with its 7 different protection features is a steal as VooPoo only placed $33.99 on each of the devices.